( LTS-2DPC ) Digital Controller Machine Vision Light

New 2DPC series have compact structure, easy to install.Have a 12V 500mA output to supply to camera. Easy to operate, output high precision voltage, can provide high precision control to LED light. It can be controlled by button or RS232, realized 0-255 grade brightness adjustment. 2DPC series controller can be used as common LED light controller, and can achieve to trigger control also ( Trigger by RS232, or external trigger). 2DPCS series controller supply to lights which has high requirement of brightness control. It is preferred light controller to high-end machine vision system.

Product Detail

Specification

Drawing download

Digital Controller Machine Vision Light

Features:

1.Easy to operate, each channel can be controlled independently with high precision.
2.Digital display, button control, easy to understand.
3.Can communicate with PC by RS232.
4.With trigger, faster respond speed, high reliability.
5.Power off saving function.
6.Have a 5V 500mA output to supply to other device.

Parameters

Model	LTS-2DPC2460 -2S/4S	LTS-2DPC2475 -8S	LTS-2DPC24120 -8S	LTS-2DPC24200 -4S	LTS-2DPC24200 -8S	LTS-2DPC24400 -2S	LTS-2DPC48600 -2S
Number of channels	2、4 way	8 way	8 way	4 way	8 way	2 way	2 way
Addition output voltage	12V 500mA	-	-	12V 500mA	-	12V 500mA	12V 500mA
Baud rate	9600bps	19200bps	19200bps	9600bps	19200bps	9600bps	9600bps
Input voltage	AC 100-240V					AC 200-240V	AC 170-264V
Output voltage range	0-24V						0-48V
Input frequency range	50/60Hz
Luminance control method	Manual adjust by button, PC remote adjustio
Luminance control mode	PWM adjusting,change PWM duty radio to adjust voltage
Luminance control Level	256 level
Storage function	Storage function set-up parameter of luminance will be kept while power off
External trigger voltage	5-24V
Communication method	RS232
Normal on/Normal closed mode switch	Change H mode by CH button,H1 mode is normal on,H0 mode is normal closed adjusting

Control panel specification < LTS-2DPC2460-4S>

Connection step:
Step 1: connected the light and controller (Reference to the picture on the right).
Step 2: if need the external trigger control, please connect the external trigger signal with the controller trigger interface.
Step 3: connect power (AC100-240V 50/60 Hz), press the red switch “-”, indicator light up, “o” uplifted, power on.
Step 4: If need to control the luminance by PC, please connect the PC with controller by RS232 data line in the power off status, then control by our demo program or the program you write yourself. Can set-up the each channel parameter manual when operated by serial port mode. That’s to say, the upper computer and controller all can set-up the parameter, no need mode swapping.

Trigger port setup < LTS-2DPC2460-4S >

This series controller is high level trigger. Total 4 group trigger ports, each has +,- mark. To input high level to +,- port can achieve the trigger function.

Trigger introduction: when under the normal on lighting mode and H1 mode, input high level 5-24V to trigger port, light close. When under H0 mode, input high level 5-24V to trigger port, light on.

Wire connection method of the external trigger signal

Sequence chart
Normal on mode (H1 mode)：
When connect external trigger signal, trigger “+” input high level 5-24V “-” ground connection, light off.
Normal closed mode (H0 mode)：
When connect external trigger signal, trigger “+” input high level 5-24V “-” ground connection, light on.

Specification: T1 is trigger delay time, T1≤80us T3≤80us.

Coding rule

Product	Model	Output voltage range	Total output power	One way Max.output power	Number ofchannels	Extenal triggervoltage	Remark
Digital controller	LTS-2DPC2460-2S	0-24V	60W	40W	2	5-24V	Have communication, trigger, and power supply to camera function
	LTS-2DPC2460-4S	0-24V	60W	40W	4
	LTS-2DPC2475-8S	0-24V	75W	40W	8
	LTS-2DPC24120-8S	0-24V	120W	60W	8
	LTS-2DPC24200-4S	0-24V	200W	60W	4
	LTS-2DPC24200-8S	0-24V	200W	60W	8
	LTS-2DPC24400-2S	0-24V	400W	200W	2
	LTS-2DPC48600-2S	0-48V	600W	300W	2