PRODUCT

( LTS-2APC ) Analog Controller Machine Vision Light


New analog controller easy to install with small volume; Have a 12V 500mA output to supply to camera. And it has the function of switching on/off mode, a common using power supply. Can be used in many applications.



Product Detail
Specification
Drawing download
Analog Controller Machine Vision Light

Features:

1.Compact dimension, easy to install.
2.Luminance stepless adjustment.
3.Short-circuit protection function.
4.External trigger function.
5.Voltage display function.
6.Clear operation mark, easy to operate.
7.Have a 12V 500mA output to supply to other device.


Parameters   

Item LTS-2APC2424-1/2/4 LTS-2APC2460-1/2/4/6 LTS-2APC24120-1/2 LTS-2APC24120-8 LTS-2APC24200-1 LTS-2APC24400-1/2 Remark
External
trigger voltage
0-1.5V 0-1.5V 5-24V 0-1.5V 5-24V 5-24V  
Number of channels 1、2、4 way 1、2、4、6 way 1、2 way 8 way 1 way 1、2 way  
Input voltage AC 100-240V AC 200-240V  
Input frequency range 50/60Hz  
Output voltage range 12-24V  
Luminance control method Manual adjusting knob  
Luminance control level Stepless adjustment  
Luminance control mode Constant-voltage  
Addition output voltage 12V output (Can power supply to camera) 500mA output This interface strictly prohibit reverse connected
Normal on/Normal closed mode switch Build-in Switch by toggle switch TS


Control panel specification < LTS-2APC2424-2 >    

Connection step:
Step 1: connected the light and controller (Reference to the picture on the right).
Step 2: if need the external trigger control, please connect the external trigger signal with the controller trigger interface.
Step 3: connect power (AC100-240V 50/60 Hz), press the red switch “-”, indicator light up, “o” uplifted, power on.

Trigger port setup < LTS-2APC2424-2 >    

This series controller are low level trigger. Total 2 group trigger ports, each has +/- mark. To input low level 0-1.5V to +/- port or +/- connected with short circuit can achieve the trigger function.


Wire connection method of the external trigger signal


Sequence chart


Specification: T1 is trigger delay time, T1≤80us  T3≤80us.

Coding rule

  
 

Product Model Output voltagerange Total output power One way Max.output power Number ofchannels Extenal triggervoltage Remark
Analog controller LTS-2APC2424-1 12-24V 24W 24W 1 0-1.5V Have voltage display, trigger, and power supply to camera function
LTS-2APC2424-2 12-24V 24W 24W 2
LTS-2APC2424-4 12-24V 24W 24W 4 Have trigger, and power supply to camera function
LTS-2APC2460-1 12-24V 60W 60W 1 Have voltage display, trigger, and power supply to camera function
LTS-2APC2460-2 12-24V 60W 30W 2
LTS-2APC2460-4 12-24V 60W 24W 4 Have trigger, and power supply to camera function
LTS-2APC2460-6 12-24V 60W 24W 6
LTS-2APC24120-1 12-24V 120W 120W 1 5-24V Have voltage display, trigger, and power supply to camera function
LTS-2APC24120-2 12-24V 120W 60W 2
LTS-2APC24120-8 12-24V 120W 24W 8 0-1.5V Have trigger, and power supply to camera function
LTS-2APC24200-1 12-24V 200W 200W 1 5-24V Have voltage display, trigger, and power supply to camera function
LTS-2APC24400-1 12-24V 400W 400W 1
LTS-2APC24400-2 12-24V 400W 200W 2